Remote Security Alarms with Built-In Shock Sensor

Home \| English \| Español
	Sign in Register Forget ID ? Forget password ?

Products

Remote Security Alarms

574/F BDWT,574/F BDWTV,598/F BDWTV
Remote Security Alarms with Built-In Shock Sensor

Key Specifications/Special Features:

574 BDWT
- 2-piece transmitter (see transmitters website for more different 2.3.4 or 5-button transmitters)
- 16 million codes
- Code-learning
- Arm output for external relay engine cut
- Jumper select passive arm
- Jumper select passive lock
- Jumper select 0.5 or 4 seconds lock timing
- Jumper select ignition lock/unlock
- Foot brake lock the door
- Lock/unlock output
- Trunk release
- Dome light output
- Window close output
- Audio arm/disarm
- Mute arm/disarm
- Built-in shock sensor with adjusting
- 2-stage shock sensing
- Remote delete sensor sensitivity
- Sensor detect delay to avoid mistrigger
- Door trigger
- Ignition key on trigger
- Defect zone warning and bypass
- Anti-hijack
- Panic
- Car locating
- 2 flash lights output
- Plug-in status LED
- Instant siren active when trigger
- 30 seconds alarm cycle
- Siren stop
- Siren included
- Emergency override
- New PIN code programmable
- On board EEPROM
- Noise abate circuit to avoid noise interference
574F BDWT: Same functions as 574 BDWT, but comes with
- 2-piece door lock relay built-in
574 BDWTV: same functions as 574 BDWT, but comes with
- Valet switch for code-learning, override and valet mode
574F BDWTV: same functions as 574 BDWTV, but comes with
- 2-piece door lock relay built-in
Code-hopping security alarms
- 598 BDWTV: same functions as 574 BDWTV, but comes with
  - Code-hopping functions with 72 quadrillion codes combination
- 598F BDWTV: same functions as 598 BDWTV code-hopping alarm, but comes with
  - 2-piece door lock relay built-in